{"product_id":"51303940-250-mc-fan511-honeywell-cabinet-fan-assembly-with-alarm","title":"51303940-250 MC-FAN511 Honeywell Cabinet Fan Assembly With Alarm","description":"\u003cp\u003eThe \u003cstrong\u003eHoneywell 51303940-250\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eMC-FAN511\u003c\/strong\u003e Cabinet Fan Assembly, operates as a dedicated hardware component for thermal dissipation and airflow fault detection within TDC 3000 Experion DCS enclosures.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e51303940-250 (MC-FAN511)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.85 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e220 x 120 x 38 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eApprox. 120 W (170-264 VAC, 0.5 A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply Voltage\u003c\/td\u003e\n\u003ctd\u003e240 VAC nominal (170-264 VAC range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Rating\u003c\/td\u003e\n\u003ctd\u003e0.5 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAirflow Capacity\u003c\/td\u003e\n\u003ctd\u003e120 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntegrated Features\u003c\/td\u003e\n\u003ctd\u003eTachometer\/airflow failure alarm contact output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eUL, CSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eThermal Management \u0026amp; Fieldbus Isolation\u003c\/h3\u003e\n\u003cp\u003eThe 51303940-250 fan assembly generates a continuous 120 CFM forced-air cooling stream across cabinet card cages, preventing localized heat build-up that compromises 4-20 mA HART loop protocol transmitters and I\/O cards. An internal rotation sensor continuously monitors impeller speed and trips an isolated dry contact alarm loop upon thermal or airflow degradation. This signal integrates directly into cabinet diagnostic buses to ensure channel-to-channel isolation and prevent over-temperature faults across DCS racks.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What action triggers the integrated alarm contact in the MC-FAN511 assembly?\u003c\/p\u003e\n\u003cp\u003eA: The internal monitoring circuit trips the alarm relay whenever fan rotation speed drops below the operational threshold or AC power line interruption occurs.\u003c\/p\u003e\n\u003cp\u003eQ: What is the acceptable AC voltage input range for operating the 51303940-250 unit?\u003c\/p\u003e\n\u003cp\u003eA: The assembly accepts an AC operating voltage range of 170 VAC to 264 VAC at a nominal line frequency of 50\/60 Hz.\u003c\/p\u003e\n\u003cp\u003eQ: Can the fan assembly be serviced or replaced while the cabinet electronics remain powered?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the fan tray can be unbolted and swapped under live cabinet conditions provided the dedicated AC supply connector is safely disconnected prior to removal.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eIsolate the incoming 240 VAC power source at the cabinet distribution breaker before servicing or connecting the 51303940-250 assembly.\u003c\/li\u003e\n\u003cli\u003eMount the fan tray securely into the enclosure mounting slots using M4 panel screws tightened to 1.2 Nm torque to prevent vibrational noise.\u003c\/li\u003e\n\u003cli\u003eTerminate the 240 VAC supply lines and alarm dry-contact wiring into the dedicated terminal block, ensuring proper wire gauge and strain relief.\u003c\/li\u003e\n\u003cli\u003eConnect the cabinet metal chassis ground bonding strap directly to the central earthing bar to safeguard against ground loops and static discharge.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52393114665256,"sku":"MC-FAN511 51303940-250","price":315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0827\/6266\/2184\/files\/MC-FAN51151303940-250.png?v=1789549051","url":"https:\/\/www.powerdcs.com\/ar\/products\/51303940-250-mc-fan511-honeywell-cabinet-fan-assembly-with-alarm","provider":"Power DCS Parts Limited","version":"1.0","type":"link"}