{"product_id":"cc-tui031-experion-c300-input-module-honeywell","title":"CC-TUI031 Experion C300 Input Module | Honeywell","description":"\u003cp\u003eThe \u003cstrong\u003eHoneywell CC-TUI031\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eCC-TUI031\u003c\/strong\u003e Input Module, operates as a dedicated hardware component for field signal conditioning and analog input acquisition within Honeywell Experion PKS C300 control networks. It converts incoming field transmitter signals into digitized process variables for controller-level logic execution.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eCC-TUI031\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.59 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e6.8 cm x 10.7 cm x 7.8 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eStandard industrial operating range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eBackplane bus powered via IOTA carrier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eUniversal \/ Analog Input Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Processing\u003c\/td\u003e\n\u003ctd\u003eMulti-channel process variable conversion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Architecture\u003c\/td\u003e\n\u003ctd\u003eHoneywell Experion Series C \/ C300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003e4-20 mA HART Loop Protocol \u0026amp; Channel-to-Channel Isolation\u003c\/h3\u003e\n\u003cp\u003eThe Honeywell CC-TUI031 input module integrates low-pass filtering and digital conversion channels designed to process standard 4-20 mA current signals and HART digital communications. Channel-to-channel isolation circuitry suppresses common-mode voltage fluctuations, preventing ground loops between field instrument drops and backplane bus electronics. The hardware supports bidirectional HART pass-through, enabling digital device calibration, primary variable extraction, and remote transmitter diagnostics directly from the Experion DCS engineering station without disrupting analog loop measurement continuity.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the CC-TUI031 module be hot-swapped while the I\/O termination assembly is energized?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the CC-TUI031 supports live insertion and removal on an active Series C IOTA board, allowing online module replacement without interrupting adjacent channel signals or backplane communication.\u003c\/p\u003e\n\u003cp\u003eQ: How does channel-to-channel isolation on the CC-TUI031 protect system backplane logic?\u003c\/p\u003e\n\u003cp\u003eA: Dedicated isolation barriers decouple field-side wiring loops from internal processing electronics, attenuating high-voltage field surges and ground potential differences before they reach the controller bus.\u003c\/p\u003e\n\u003cp\u003eQ: What power source supplies the operating current for the CC-TUI031 module?\u003c\/p\u003e\n\u003cp\u003eA: The module draws its primary operational logic power directly from the 24 VDC redundant backplane distribution lines on the Series C IOTA carrier assembly.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eInspect the card edge connectors and carrier guide rails on the Series C IOTA slot to ensure freedom from debris or physical damage.\u003c\/li\u003e\n\u003cli\u003eAlign the CC-TUI031 module with the vertical card guides of the assigned slot on the I\/O Termination Assembly.\u003c\/li\u003e\n\u003cli\u003eApply firm, steady pressure until the rear multi-pin connector fully seats into the IOTA backplane header and the retention latches snap closed.\u003c\/li\u003e\n\u003cli\u003eVerify that field wiring shields are connected to the designated ground bus bar at a single point to prevent circulating noise currents from affecting analog measurement accuracy.\u003c\/li\u003e\n\u003cli\u003eEnsure field transmitter wiring is terminated on the correct IOTA terminal blocks according to the system loop diagram prior to energizing the loop power circuit.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52346461290792,"sku":"CC-TUI031","price":315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0827\/6266\/2184\/files\/CC-TUI031_Cocoai.png?v=1788851510","url":"https:\/\/www.powerdcs.com\/ar\/products\/cc-tui031-experion-c300-input-module-honeywell","provider":"Power DCS Parts Limited","version":"1.0","type":"link"}