FBM214 P0916DC | Foxboro | HART Communication Input Module
Specifications
Manufacturer: Foxboro
Product No.: FBM214 P0916DC
Condition: 10 العناصر الموجودة في المخزون
Product Type: HART Input Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 400g
Shipping port: Xiamen
Warranty: 12 months
تفاصيل المنتج
وصف
The FBM214 P0916DC is a Foxboro 8-channel HART communication input module designed for I/A Series and EcoStruxure Foxboro DCS platforms. Each isolated channel reads a 4-20 mA DC analog signal with digital HART overlay (Versions 5, 6, and 7) at 15-bit resolution and +-0.03% of span accuracy, powered from 24 VDC via the baseplate.
Dual-Signal Acquisition and HART Pass-Through
Each of the eight channels on the FBM214 P0916DC processes the 4-20 mA analog loop current alongside digital HART communication over a nominal 250 Ohm input impedance. Simultaneous dual-signal handling allows real-time analog measurement updates to continue while HART diagnostic polling or configuration traffic runs on the loop.
HART pass-through supports communication with field device tools (FDT) and asset management software (listed in the source as Asset Management Circles / AMS) for remote device diagnostics and calibration. Verify HART instrument version compatibility and loop burden limits against your field wiring and transmitter specifications during engineering setup.
Isolation, Redundancy, and Baseplate Operation
Every input channel is galvanically isolated from adjacent channels and from system logic to limit ground loops and noise transfer on field runs. The module draws 24 VDC from the baseplate and supports redundant configurations on a compatible redundant baseplate when system rules call for paired modules.
Hot-swap capability is specified for module replacement without powering down the Field Control Processor (FCP) or disturbing other modules on the same baseplate. Always follow plant safety procedures, confirm baseplate slot and redundancy rules, and verify exact part number FBM214 P0916DC before servicing or ordering.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | FBM214 P0916DC |
| Brand | Foxboro |
| Product Type | HART Communication Input Interface Module |
| Platforms | I/A Series, EcoStruxure Foxboro DCS |
| Input Channels | 8 isolated channels |
| Input Signal | 4-20 mA DC analog with digital HART overlay |
| Input Impedance | 250 Ohm nominal |
| Resolution | 15-bit |
| Accuracy | +-0.03% of span |
| HART Protocol Support | Version 5, 6, and 7 compatible |
| Power Supply | 24 VDC (sourced from baseplate) |
| Isolation | Galvanic isolation per channel from other channels and system logic |
| Redundancy | Supported on a compatible redundant baseplate |
| Hot-Swap Support | Supported without powering down FCP or other modules on the same baseplate |
Frequently Asked Questions
Q: What signal types and HART versions does the Foxboro FBM214 P0916DC support?
A: It provides 8 isolated channels for 4-20 mA DC analog signals with digital HART overlay and supports HART Versions 5, 6, and 7. Confirm transmitter compatibility, 250 Ohm nominal loop impedance, and engineering scaling before loop commissioning.
Q: Can the FBM214 P0916DC be configured for redundancy and replaced while the system is running?
A: Yes, the source specifies redundant pairing on a compatible redundant baseplate as well as hot-swap support without powering down the FCP or neighboring modules on the same baseplate. Verify baseplate model compatibility and follow site maintenance procedures before installation or replacement.
Q: How does channel isolation protect 4-20 mA HART loops on the FBM214 P0916DC?
A: Each input channel is galvanically isolated from other channels and from system logic, helping reduce ground loops and electrical noise coupling. Check field loop grounding and shield termination rules in your control drawings to maintain measurement accuracy.
كيفية الحصول على عرض أسعار
تتبع الطلب
شركات الشحن
سياسة وشروط الاسترداد
شروط الضمان
منتجات ذات صله
- يؤدي اختيار تحديد إلى تحديث كامل للصفحة.