{"product_id":"fc-qpp-0002-v1-2-quad-processor-honeywell","title":"FC-QPP-0002 V1.2 Quad Processor | Honeywell","description":"\u003cp\u003eThe \u003cstrong\u003eHoneywell FC-QPP-0002 V1.2\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eFC-QPP-0002\u003c\/strong\u003e Quad Processor, operates as a dedicated hardware component for high-integrity safety logic execution and system task processing within Honeywell Safety Manager platforms. It executes application logic, evaluates field input states, and manages system backplane bus communications to drive safe control outputs.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eFC-QPP-0002 V1.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.28 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e8.8 cm x 22.7 cm x 17.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 to +60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eSystem backplane powered (Internal bus draw \u0026lt; 15 W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArchitecture\u003c\/td\u003e\n\u003ctd\u003eQuad Processor Subsystem\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware Revision\u003c\/td\u003e\n\u003ctd\u003eV1.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Platform\u003c\/td\u003e\n\u003ctd\u003eHoneywell Safety Manager \/ FSC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control \u0026amp; DCS Signal Processing Characteristics\u003c\/h3\u003e\n\u003cp\u003eThe FC-QPP-0002 V1.2 module incorporates high-density channel-to-channel isolation across its backplane data interfaces to prevent transient ground loops from propagating into the central logic solver. Designed to process data acquired from 4-20 mA HART loop protocol field devices and discrete I\/O subsystems, the quad-processor architecture continuously cross-checks execution pathways, filtering electromagnetic interference and ensuring deterministic scan execution for critical safety loops.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the FC-QPP-0002 V1.2 support hot-swapping during active system operation?\u003c\/p\u003e\n\u003cp\u003eA: Hot-swapping is supported provided the redundant secondary processor module is fully synchronized and backplane power stability is verified prior to module extraction.\u003c\/p\u003e\n\u003cp\u003eQ: How does the V1.2 hardware revision impact backplane bus communication?\u003c\/p\u003e\n\u003cp\u003eA: Revision V1.2 provides optimized internal bus arbitration and enhanced firmware compatibility, maintaining deterministic scan times across high-density I\/O configurations.\u003c\/p\u003e\n\u003cp\u003eQ: What precautions should be observed regarding ESD during installation?\u003c\/p\u003e\n\u003cp\u003eA: Field service engineers must wear a grounded wrist strap attached to the cabinet ESD grounding point to prevent electrostatic discharge damage to internal processor components during insertion.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Mounting:\u003c\/strong\u003e Align the module top and bottom card guides with the designated chassis slot in the rack frame. Gently slide the assembly inward until backplane multi-pin connectors are fully seated, then tighten the top and bottom retaining screws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding \u0026amp; Grounding:\u003c\/strong\u003e Ensure the enclosure chassis is grounded to the main plant earthing system via a low-impedance copper earth bus bar. All field wiring shields connected to associated I\/O racks must maintain single-point grounding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower \u0026amp; Wiring Separation:\u003c\/strong\u003e Keep low-voltage logic signal backplane interconnects and communication lines separated from high-voltage AC power cables inside the cabinet by a minimum clearance distance of 30 cm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal Management:\u003c\/strong\u003e Maintain unimpeded vertical air circulation above and below the module rack assembly to support natural convective cooling across the heat sinks.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52716486164776,"sku":"FC-QPP-0002 V1.2","price":315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0827\/6266\/2184\/files\/FC-QPP-0001_cebd7f56-fc64-4866-8501-d03e253f2652.jpg?v=1790064397","url":"https:\/\/www.powerdcs.com\/ar\/products\/fc-qpp-0002-v1-2-quad-processor-honeywell","provider":"Power DCS Parts Limited","version":"1.0","type":"link"}