Honeywell TC-FPDXX2 Uncoated Series-A Power Supply
Specifications
Manufacturer: Honeywell
Product No.: TC-FPDXX2
Condition： 10 العناصر الموجودة في المخزون
Product Type: Power Supply Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 2500g
Shipping port: Xiamen
Warranty: 12 months
تفاصيل المنتج
وصف
The Honeywell TC-FPDXX2, also cataloged as the TC-FPDXX2 Power Supply Modules, operates as a dedicated hardware component for direct chassis backplane DC voltage distribution and bus power conversion within Experion PKS C200/C200E Series A platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | TC-FPDXX2 |
| Brand | Honeywell |
| Origin | USA |
| Weight | 1.1 kg (Shipping Weight: 2.5 kg) |
| Dimensions | 11.2 cm x 14.5 cm x 14.0 cm (4.41 in x 5.71 in x 5.51 in) |
| Operating Temp | 0 to +60 deg C |
| Power Consumption | Input Power: 100 W (Input Voltage: 19.2-32 VDC) |
| Total Output Power | 70 W max at 60 deg C |
| Backplane Current Ratings | 1.5 A at 1.2 VDC, 4 A at 3.3 VDC, 10 A at 5.1 VDC, 2.8 A at 24.0 VDC |
| Maximum Inrush Current | 30 A |
| Frequency Range | DC |
| Overcurrent Protection | Non-replaceable internal soldered fuse |
| Recommended Wiring | #14 AWG (1.4 mm) |
| Mounting Location | Left side of chassis (non-slot consuming) |
| Product Category | Power Supply Modules |
Channel-to-Channel Isolation & Cold Junction Compensation (CJC) Power Stability
The TC-FPDXX2 power supply converts 19.2-32 VDC input power into four regulated backplane buses: 1.2 VDC, 3.3 VDC, 5.1 VDC, and 24.0 VDC. The internal transformer topology provides galvanic isolation between the primary DC feed line and the backplane logic tracks. This power conversion barrier prevents power-line transients from leaking into adjacent 4-20 mA HART loop protocol signal paths or disturbing cold junction compensation (CJC) reference networks embedded across analog input channels mounted in the chassis.
Frequently Asked Questions
Q: Can the TC-FPDXX2 power supply be replaced without shutting down power to the chassis?
A: No, replacing the TC-FPDXX2 requires de-energizing the main 24 VDC input feed, as unseating the power module drops logic power to all backplane slots simultaneously.
Q: Does the TC-FPDXX2 occupy a standard I/O card slot in the Series A chassis?
A: No, the module mounts specifically on the left side of the chassis housing without consuming any of the numerical I/O expansion slots.
Q: What protection mechanism is utilized against primary overcurrent conditions?
A: Internal protection is provided via a non-replaceable fuse soldered directly onto the main power circuit board assembly.
Field Installation Guidelines
- Mount the TC-FPDXX2 on the far-left position of the Series A chassis frame, ensuring the mechanical alignment tabs seat into the backplane guide slots.
- Secure the module retaining screws to the frame to establish low-resistance enclosure grounding.
- Terminate primary 24 VDC power feed conductors using copper wire sized at #14 AWG (1.4 mm).
- Verify input voltage polarity before applying power to ensure inrush current remains within the 30 A maximum rating.
كيفية الحصول على عرض أسعار
تتبع الطلب
شركات الشحن
سياسة وشروط الاسترداد
شروط الضمان
منتجات ذات صله
- يؤدي اختيار تحديد إلى تحديث كامل للصفحة.