{"product_id":"cc-tsv211-honeywell-experion-pks-series-c-servo-valve-positioner-module","title":"CC-TSV211 Honeywell Experion PKS Series C Servo Valve Positioner Module","description":"\u003cp\u003eThe \u003cstrong\u003eHoneywell CC-TSV211 51306665-175\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eCC-TSV211\u003c\/strong\u003e Servo Valve Positioner Module, operates as a dedicated hardware component for hydraulic actuator positioning through servo coil drive and position feedback processing within Experion PKS Series C I\/O systems.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eCC-TSV211 (51306665-175)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e44.3 x 12 x 7.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eStandard Industrial Temperature Range (-40 to +70 deg C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eSystem-powered via Series C IOTA backplane bus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eServo Valve Positioner Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Channels\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDAC Resolution\u003c\/td\u003e\n\u003ctd\u003e16-bit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Open Circuit Voltage\u003c\/td\u003e\n\u003ctd\u003e+\/-14 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGalvanic Isolation\u003c\/td\u003e\n\u003ctd\u003e+\/-500 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput\/Output Range\u003c\/td\u003e\n\u003ctd\u003e8 V RMS max., 2.5-3.2 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Impedance\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 25 kOhm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Scan Rate\u003c\/td\u003e\n\u003ctd\u003e2.5 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommon Mode Voltage\u003c\/td\u003e\n\u003ctd\u003e-6 to +5 V peak, DC to 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeedback Interface\u003c\/td\u003e\n\u003ctd\u003eLVDT \/ RVDT \/ 4-20 mA position feedback support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Function\u003c\/td\u003e\n\u003ctd\u003eOnboard PID servo positioning loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Function\u003c\/td\u003e\n\u003ctd\u003eDirect servo valve coil current drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003e4-20 mA HART Loop Protocol and Channel Isolation Execution\u003c\/h3\u003e\n\u003cp\u003eOperating within Experion PKS Series C architectures, the CC-TSV211 module executes low-latency closed-loop position control for hydraulic actuators. The hardware accepts feedback signals from LVDT, RVDT, or standard 4-20 mA HART loop protocol transmitters and processes internal PID algorithms at a 2.5 ms input scan rate. To protect sensitive control electronics from harsh industrial environments, the module features +\/-500 VDC galvanic channel-to-channel isolation. This barrier blocks severe ground loop currents, common-mode voltage fluctuations, and external electrical noise from entering the backplane bus.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What position feedback sensors are supported by the CC-TSV211 module?\u003c\/p\u003e\n\u003cp\u003eA: The CC-TSV211 supports direct interfacing with LVDT, RVDT, and standard 4-20 mA position feedback devices across its dual input channels.\u003c\/p\u003e\n\u003cp\u003eQ: Is the CC-TSV211 module hot-swappable on an active Series C IOTA baseplate?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the module supports live online insertion and removal (hot-swapping) on an energized IOTA without interrupting backplane communications or adjacent channel execution.\u003c\/p\u003e\n\u003cp\u003eQ: How is galvanic isolation structured on the CC-TSV211 hardware?\u003c\/p\u003e\n\u003cp\u003eA: Internal optical and galvanic isolation barriers provide +\/-500 VDC isolation between field-side field wiring circuits and the central C300 controller backplane bus.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eAlign the module rear connectors with the target slot on the Series C IOTA carrier and press firmly until mechanical locking latches engage fully.\u003c\/li\u003e\n\u003cli\u003eRoute position feedback and servo coil drive cables through separate wire ducts, maintaining at least 200 mm clearance from high-voltage AC lines to prevent inductive noise coupling.\u003c\/li\u003e\n\u003cli\u003eGround all signal cable shield drain wires at a single point on the cabinet earth ground bus bar to prevent circulating ground loops.\u003c\/li\u003e\n\u003cli\u003eVerify LVDT\/RVDT excitation voltages and feedback signal range configurations prior to powering up servo coil drive outputs.\u003c\/li\u003e\n\u003cli\u003eProvide a minimum vertical clearance zone of 100 mm above and below the module assembly to ensure unobstructed natural convective cooling airflow.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52357560238376,"sku":"CC-TSV211","price":315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0827\/6266\/2184\/files\/CC-PAIX0151405038-275_Cocoai_c99bcf90-9db8-4497-946c-a72f8f979d82.png?v=1788943552","url":"https:\/\/www.powerdcs.com\/es\/products\/cc-tsv211-honeywell-experion-pks-series-c-servo-valve-positioner-module","provider":"Power DCS Parts Limited","version":"1.0","type":"link"}