Foxboro FBM216 P0917XQ Communication Redundant Input Interface Module

Specifications

  • Manufacturer: Foxboro

  • Product No.: FBM216 P0917XQ

  • Condition: 10 Artículos en stock

  • Product Type: Input Interface Modules

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 400g

  • Shipping port: Xiamen

  • Warranty: 12 months

Detalles de producto

Descripción

The Foxboro FBM216 P0917XQ is an 8-channel input interface module supporting HART Protocol v6 over point-to-point, asynchronous, half-duplex links at 1200 baud. It provides group-isolated channels, 15-bit analog resolution with +/- 0.075% full-scale accuracy, a 100 ms update rate, and cable runs up to 3030 m (10000 ft) per HART FSK specification HCF_SPEC-54 Revision 8.1.

HART Communication and Timing

Each of the 8 group-isolated channels communicates point-to-point in a master/slave, asynchronous, half-duplex arrangement at 1200 baud, reaching up to 2 messages per second. Per-byte parity and a CRC check byte verify message integrity, with a fastest allowed ECB block period of 500 msec.

Under HART FSK physical layer specification HCF_SPEC-54 Revision 8.1, cable distance between the module and field device reaches up to 3030 m (10000 ft). The interface specifies a minimum compliance voltage of 18 VDC at 20.5 mA.

Analog Input Characteristics and Physical Dimensions

Current inputs sense across a 61.9 ohm nominal sense resistor with a 280 ohm minimum total input resistance, 15-bit resolution, and +/- 0.075% full-scale accuracy including nonlinearity. Signal conditioning features a 100 ms update rate, 500 ms integration time, 50 PPM/deg C temperature coefficient, greater than 100 dB common mode rejection at 50 or 60 Hz, and greater than 35 dB normal mode rejection at 50 or 60 Hz.

The module measures 102 mm (4 in) high—or 114 mm (4.5 in) including mounting lugs—by 45 mm (1.75 in) wide by 104 mm (4.11 in) deep, with an approximate mass of 284 g (10 oz). Compatible termination assemblies weigh approximately 181 g (0.40 lb) for compression style and 249 g (0.55 lb) for ring lug style.

Technical Specifications

Parameter Specification
Model FBM216 P0917XQ
Brand Foxboro
Supported Protocol HART Protocol v6
Channels 8 group-isolated channels
Device Communication Point-to-point, master/slave, asynchronous, half-duplex, 1200 baud
Error Checking Parity on each byte, plus one CRC check byte
Message Speed 2 messages per second
Fastest ECB Block Period 500 msec
Maximum Cable Distance Up to 3030 m (10000 ft) per HART FSK HCF_SPEC-54 Revision 8.1
Compliance Voltage 18 VDC minimum at 20.5 mA
Sense Resistor 61.9 ohm nominal
Total Input Resistance 280 ohm minimum
Analog Accuracy +/- 0.075% of full scale (includes nonlinearity)
Temperature Coefficient 50 PPM/deg C
Resolution 15 bits
Update Rate 100 ms
Integration Time 500 ms
Common Mode Rejection Greater than 100 dB at 50 or 60 Hz
Normal Mode Rejection Greater than 35 dB at 50 or 60 Hz
Module Dimensions 102 mm (4 in) height (114 mm / 4.5 in with mounting lugs) x 45 mm (1.75 in) width x 104 mm (4.11 in) depth
Module Mass 284 g (10 oz) approximate
Termination Assembly Mass Compression: 181 g (0.40 lb) approximate; Ring Lug: 249 g (0.55 lb) approximate

Frequently Asked Questions

Q: What is the maximum cable distance between the Foxboro FBM216 P0917XQ and a HART field device?

A: It supports distances up to 3030 m (10000 ft) in accordance with HART FSK physical layer specification HCF_SPEC-54 Revision 8.1.

Q: What are the analog accuracy, resolution, and input resistance ratings for current inputs?

A: Current inputs provide 15-bit resolution, +/- 0.075% full-scale accuracy including nonlinearity, a 61.9 ohm nominal sense resistor, and a 280 ohm minimum total input resistance.

Q: How is serial error checking handled on the HART link?

A: Each byte includes parity checking along with one CRC check byte during 1200 baud point-to-point half-duplex communication.

Cómo obtener una cotización

Rastreo de orden

Transportistas

Política y condiciones de reembolso

Condiciones de garantía

Productos relacionados