{"product_id":"cc-pwrr01-honeywell-experion-c300-redundant-power-module","title":"CC-PWRR01 Honeywell Experion C300 Redundant Power Module","description":"\u003cp\u003eConfigured for power distribution in Honeywell Experion C300 systems, the \u003cstrong\u003eHoneywell CC-PWRR01 51199939-100\u003c\/strong\u003e (\u003cstrong\u003eCC-PWRR01\u003c\/strong\u003e Redundant Power Module) provides direct physical\/electrical execution. It regulates primary utility lines to feed stable 24 VDC voltage directly onto the controller backplane bus.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eCC-PWRR01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e51199939-100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.60 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e31.3 cm x 3.0 cm x 27.8 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 deg C to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eSystem load dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage (AC)\u003c\/td\u003e\n\u003ctd\u003e85-264 V AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage (DC)\u003c\/td\u003e\n\u003ctd\u003e120-370 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Voltage\u003c\/td\u003e\n\u003ctd\u003eRegulated 24 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Current\u003c\/td\u003e\n\u003ctd\u003eUp to 10 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Regulation\u003c\/td\u003e\n\u003ctd\u003e+\/-0.5% of nominal voltage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRedundancy Architecture\u003c\/td\u003e\n\u003ctd\u003eDual supplies with automatic load sharing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003e4-20 mA HART Loop Protocol \u0026amp; Channel-to-Channel Isolation\u003c\/h3\u003e\n\u003cp\u003eThe Honeywell CC-PWRR01 incorporates high-efficiency active rectification stages alongside dual internal power channels protected by internal galvanic channel-to-channel isolation. This isolation prevents cross-channel short circuits, ground loops, and high-voltage line transients from propagating between primary supply feeds and downstream Experion C300 processing logic. Integrated dynamic load-sharing circuitry balances output current demands across redundant power rails, keeping component operating temperatures within nominal limits and preserving 24 VDC bus stability during line fault transitions. The module monitoring interface supports 4-20 mA HART loop protocol diagnostic signaling to report power supply health directly to host DCS controllers.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How is real-time status monitored on the CC-PWRR01 power system?\u003c\/p\u003e\n\u003cp\u003eA: The module is equipped with physical alarm dry contacts that change state upon a supply failure, facilitating immediate fault detection through the plant-wide DCS diagnostic interface.\u003c\/p\u003e\n\u003cp\u003eQ: Is hot-swapping of an individual power channel supported within this system?\u003c\/p\u003e\n\u003cp\u003eA: Yes. Because the module incorporates automated load sharing and back-feed protection diodes, an individual power supply module can be safely extracted and replaced under load without interrupting the regulated 24 V DC output to the C300 controllers.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMount the reinforced metal enclosure vertically within the control cabinet, ensuring all ventilation slots remain unobstructed to allow natural thermal convection.\u003c\/li\u003e\n\u003cli\u003eConnect the dual AC or DC primary input lines to the dedicated distribution terminals, verifying that input sources originate from separate feeder breakers to ensure true feed redundancy.\u003c\/li\u003e\n\u003cli\u003eTerminate the protective earth ground wire directly to the main cabinet ground bus before applying primary power to the module.\u003c\/li\u003e\n\u003cli\u003eRoute the regulated 24 V DC output cables to the C300 controller chassis, keeping these lines isolated from high-voltage motor control and switching circuits.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52348118139176,"sku":"CC-PWRR01 51199939-100","price":315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0827\/6266\/2184\/files\/CC-PWRR0151199939-100.png?v=1788854725","url":"https:\/\/www.powerdcs.com\/products\/cc-pwrr01-honeywell-experion-c300-redundant-power-module","provider":"Power DCS Parts Limited","version":"1.0","type":"link"}