Foxboro FBM214 RH927AH I/A Series HART Communication Analog Input Module
Specifications
Manufacturer: Foxboro
Product No.: FBM214 RH927AH
Condition: 10 Items in Stock
Product Type: Analog Input Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 288g
Shipping port: Xiamen
Warranty: 12 months
Product details
Description
The Foxboro FBM214 RH927AH is an 8-channel isolated analog input module for Foxboro I/A Series systems. It acquires 4-20 mA DC signals with 15-bit resolution and +/- 0.03% of span accuracy, while supporting bidirectional HART communication (Versions 5, 6, and 7) and redundant pair configurations over a 2 Mbps redundant Module Fieldbus.
HART Communication, Isolation, and Redundancy
Each of the 8 galvanically isolated channels reads a 4-20 mA DC signal and supports HART Versions 5, 6, and 7 for field instrument configuration and diagnostic data exchange. Dedicated per-channel microprocessing and communication over the 2 Mbps redundant Module Fieldbus support deterministic updates, while redundant module pairs enable bumpless failover when configured.
Galvanic isolation is rated at 600 VAC input-to-bus and input-to-ground to separate field loops from control circuits. Built-in diagnostics check internal hardware health as well as sensor burnout and short circuit conditions.
Power, Environmental Limits, and Installation Notes
Maximum power consumption is 3.5 W, with an operating temperature range of -20 to 70 deg C and a storage temperature range of -40 to 85 deg C.
For installation, power down the control system before inserting or removing the module from the baseplate, and follow ESD-safe handling practices. Use shielded twisted-pair cabling for analog inputs, ground cable shields at the field termination assembly (FTA) or per plant grounding rules, and leave clearance for airflow in dense racks.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | FBM214 (RH927AH); listed as FBM 214b (RH927AH) in specification table |
| Brand | Foxboro (Foxboro by Schneider Electric) |
| Series | Foxboro I/A Series |
| Module Type | HART Communication Analog Input Module |
| Input Channels | 8 isolated |
| Signal Range | 4-20 mA DC |
| HART Protocol | Versions 5, 6, and 7 |
| Accuracy | +/- 0.03% of span |
| Resolution | 15 bits |
| Isolation | 600 VAC (input-to-bus and input-to-ground) |
| Communication Bus | 2 Mbps redundant Module Fieldbus |
| Diagnostics | Internal self-test, sensor burnout, short circuit detection, hardware health |
| Power Consumption | 3.5 W maximum |
| Operating Temperature | -20 to 70 deg C |
| Storage Temperature | -40 to 85 deg C |
Frequently Asked Questions
Q: Which HART protocol versions does the Foxboro FBM214 RH927AH support?
A: It supports HART Versions 5, 6, and 7 for bidirectional communication with compatible field instruments in Foxboro I/A Series systems.
Q: Can two FBM214 modules operate in a redundant pair?
A: Yes, the module supports redundant pair configurations for bumpless failover when a primary module experiences a fault.
Q: What wiring and power precautions apply during installation?
A: Power down the control system before baseplate insertion or removal, observe ESD handling precautions, and wire analog inputs using shielded twisted-pair cable grounded at the FTA or per plant grounding standards.
How to Get a Quote
Order Tracking
Shipping Carriers
Refund Policy and Conditions
Warranty Conditions
Related Products
- Choosing a selection results in a full page refresh.