{"product_id":"honeywell-51202329-736-extension-cable","title":"Honeywell 51202329-736 Extension Cable","description":"\u003cp\u003eThe Honeywell \u003cstrong\u003e51202329-736\u003c\/strong\u003e (also cataloged as 51202329 Extension Cable) is a 48-inch (1.2 m) paired I\/O link extension cable designed for signal routing in Honeywell Experion PKS (C300) and TDC 3000 control platforms. It connects controller modules to field termination assemblies while preserving signal integrity in dense panel layouts.\u003c\/p\u003e\n\u003ch3\u003eCable Pairing and Signal Routing\u003c\/h3\u003e\n\u003cp\u003eThis extension assembly operates as a paired cable system comprising Cable A (yellow label, 51202329-734) and Cable B (green label, 51202329-735). Both cables must be installed together to ensure correct signal mapping and channel-to-channel isolation between control hardware and I\/O interfaces.\u003c\/p\u003e\n\u003ch3\u003eConstruction and Fieldbus Compliance\u003c\/h3\u003e\n\u003cp\u003eThe cable features a distinctive violet outer jacket for rapid identification in complex control cabinets. As a passive cable assembly, it consumes no power and is designed to preserve noise immunity for FOUNDATION Fieldbus and Profibus PA network connections.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e51202329-736\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eI\/O Link Extension Cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e48 in (1.2 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Color\u003c\/td\u003e\n\u003ctd\u003eViolet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Assembly Components\u003c\/td\u003e\n\u003ctd\u003eCable A (yellow label, 51202329-734) \/ Cable B (green label, 51202329-735)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive cable (0 W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003eControl-room ambient range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eI\/O Link extension for Honeywell control systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eHoneywell Experion PKS (C300), TDC 3000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eInstall both Cable A and Cable B together to maintain correct signal routing across the I\/O link interface.\u003c\/li\u003e\n\u003cli\u003eRoute extension cables away from high-voltage AC conductors to minimize electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003eGround cable shields exclusively at the controller termination point to prevent ground loop currents.\u003c\/li\u003e\n\u003cli\u003eVerify channel assignment using the violet cable jacket and colored labels (yellow for Cable A, green for Cable B).\u003c\/li\u003e\n\u003cli\u003ePerform continuity and signal integrity checks with loop test equipment prior to system commissioning.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003eQ: Can the 51202329-736 extension cable be used individually?\u003c\/p\u003e\n\u003cp\u003eA: No, it operates as a paired system and must be installed with both Cable A (51202329-734) and Cable B (51202329-735) for proper I\/O link extension.\u003c\/p\u003e\n\u003cp\u003eQ: How should the cable shielding be grounded during installation?\u003c\/p\u003e\n\u003cp\u003eA: Cable shielding must be grounded at the control system end only to prevent ground loop currents.\u003c\/p\u003e\n\u003cp\u003eQ: Does this cable support redundant system configurations?\u003c\/p\u003e\n\u003cp\u003eA: The cable provides standard I\/O link extensions, with redundancy managed at the system controller level rather than within the cable itself.\u003c\/p\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":68013038207272,"sku":"51202329-736","price":315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0827\/6266\/2184\/files\/51202329-412_52d00ba8-b5b6-4727-9fa5-94f935404d7c.png?v=1793088928","url":"https:\/\/www.powerdcs.com\/products\/honeywell-51202329-736-extension-cable","provider":"Power DCS Parts Limited","version":"1.0","type":"link"}