Honeywell FS-SICC-0001/L24 System Interconnection Cable

The Honeywell FS-SICC-0001/L24, also cataloged as the FS-SICC-0001 System Interconnection Cable, operates as a dedicated hardware component for multi-channel signal routing between modules and Field Termination Assemblies (FTAs) within Honeywell Safety Manager architectures.

Hardware Specifications

4-20 mA HART Loop Protocol and Channel-to-Channel Isolation

The double-shielded construction of the FS-SICC-0001/L24 assembly preserves signal integrity across long runs between control racks and termination units. High channel-to-channel isolation is maintained along the 20-conductor bundle, suppressing crosstalk between adjacent telemetry pathways. This shielding architecture attenuates external electromagnetic interference (EMI), ensuring high-fidelity transmission of analog measurement signals and digital communication over 4-20 mA HART loop protocol connections.

Frequently Asked Questions

Q: What is the maximum voltage rating supported by the conductors in this cable assembly?

A: The FS-SICC-0001/L24 conductors carry an absolute maximum continuous rating of 300 V.

Q: Can this cable assembly be used in outdoor installations with high ambient temperature fluctuations?

A: The thermoplastic isolation jacket supports continuous operational exposure from -20 deg C up to +85 deg C.

Q: How does the cable construction prevent electromagnetic interference across signal pairs?

A: The assembly incorporates double shielding along its full 24 m length with a 120 ohm characteristic impedance match.

Field Installation Guidelines

• Observe the minimum static and dynamic bend radius limits corresponding to the 9.93 mm outer diameter during cable tray routing.
• Fasten pre-terminated connector locking mechanisms securely to FTA interface headers to prevent pin contact oxidation or vibration loosening.
• Verify shield continuity and ensure proper grounding at designated cabinet earth buses to avoid noise coupling and ground loops.
• Avoid running system interconnect cables in close parallel proximity to high-voltage AC power distribution conduits.