Honeywell FS-SICC-0001/L9 System Interconnection Cable

Configured for multi-channel signal routing in Honeywell Safety Manager architectures, the Honeywell FS-SICC-0001/L9 (FS-SICC-0001 System Interconnection Cable) provides direct physical/electrical execution.

Hardware Specifications

4-20 mA HART Loop Protocol and Channel-to-Channel Isolation

The double-shielded construction of the FS-SICC-0001/L9 assembly preserves signal integrity across cabinet-to-cabinet interconnections. High channel-to-channel isolation is maintained along the 20-conductor bundle, suppressing crosstalk between adjacent telemetry pathways. This shielding architecture attenuates external electromagnetic interference (EMI), ensuring high-fidelity transmission of analog measurement signals and digital communication over 4-20 mA HART loop protocol connections.

Frequently Asked Questions

Q: What physical length does the L9 suffix denote for the FS-SICC-0001 series?

A: The FS-SICC-0001/L9 cable specifies a overall assembly length of 9 meters.

Q: Can this cable assembly be hot-swapped during online maintenance?

A: Disconnecting the cable interrupts field signal pathways; redundant loop paths must be verified prior to removal to prevent unintended trip conditions.

Q: How is EMI suppression achieved across the conductor core?

A: The cable utilizes continuous double shielding combined with a 120 ohm nominal impedance profile along its full length.

Field Installation Guidelines

• Observe minimum static and dynamic bend radius limits corresponding to the 9.93 mm outer diameter during cable tray routing.
• Fasten pre-terminated connector locking mechanisms securely to FTA interface headers to prevent pin contact oxidation or vibration loosening.
• Verify shield continuity and ensure proper grounding at designated cabinet earth buses to avoid noise coupling and ground loops.
• Avoid running system interconnect cables in close parallel proximity to high-voltage AC power distribution conduits.