{"product_id":"honeywell-tc-fccn01-controlnet-gateway-adapter","title":"Honeywell TC-FCCN01 ControlNet Gateway Adapter","description":"\u003cp\u003eThe \u003cstrong\u003eHoneywell TC-FCCN01\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eTC-FCCN01\u003c\/strong\u003e ControlNet Gateway Adapter, operates as a dedicated hardware component for deterministic network interfacing within C300 controller systems. Configured for non-redundant ControlNet media configurations, the adapter manages high-speed data frame transfer between local backplane logic and remote field devices or peer controllers. It converts parallel internal bus signals into serial ControlNet bit streams over fiber optic or RG-6 coaxial cabling.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eTC-FCCN01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e6.00 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e87 x 94 x 69 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to +55 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eLess than 5 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e24 VDC nominal (19.2 to 31.2 VDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Speed\u003c\/td\u003e\n\u003ctd\u003e5 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedia Type\u003c\/td\u003e\n\u003ctd\u003eFiber optic or coaxial (Belden RG-6\/U Quad Shield)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Types\u003c\/td\u003e\n\u003ctd\u003eSC or ST (user-selectable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation Voltage\u003c\/td\u003e\n\u003ctd\u003e500 VAC between user power and Flexbus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexbus Output Power\u003c\/td\u003e\n\u003ctd\u003eMax 640 mA at 5 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Supported Modules\u003c\/td\u003e\n\u003ctd\u003eUp to 8 modules\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eCold Junction Compensation \u0026amp; Signal Isolation\u003c\/h3\u003e\n\u003cp\u003eThe Honeywell TC-FCCN01 features a 500 VAC isolation barrier between external user power and the internal Flexbus backplane, suppressing common-mode noise and ground loop propagation across networked channels. While primary functions handle deterministic protocol transmission, connected analog I\/O modules leverage backplane signal regulation to preserve sensor measurement integrity, including thermocouple cold junction compensation (CJC) accuracy and 4-20 mA HART loop processing across the C300 architecture.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How much current can the TC-FCCN01 supply to adjacent modules via the Flexbus?\u003c\/p\u003e\n\u003cp\u003eA: The module supplies a maximum output of 640 mA at 5 VDC across the local Flexbus backplane to power up to 8 expansion I\/O modules.\u003c\/p\u003e\n\u003cp\u003eQ: What are the physical media and connector options for the ControlNet port?\u003c\/p\u003e\n\u003cp\u003eA: The adapter supports Belden RG-6\/U Quad Shield coaxial cable or fiber optic cabling utilizing user-selectable SC or ST connectors.\u003c\/p\u003e\n\u003cp\u003eQ: Can the TC-FCCN01 be deployed in a redundant ControlNet media configuration?\u003c\/p\u003e\n\u003cp\u003eA: No, the TC-FCCN01 is specifically engineered for non-redundant ControlNet network topographies.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMount the TC-FCCN01 firmly onto the mounting rail and verify mechanical retention clips are secured before applying power.\u003c\/li\u003e\n\u003cli\u003eConnect 24 VDC external power wiring (19.2 to 31.2 VDC range) to the designated supply terminals, observing strict polarity.\u003c\/li\u003e\n\u003cli\u003eFor coaxial runs, terminate using RG-6\/U Quad Shield cable with standard BNC connectors; for fiber optic runs, route through SC or ST connectors avoiding bend radii tighter than manufacturer limits.\u003c\/li\u003e\n\u003cli\u003eEnsure the overall cable shield and chassis ground wire connect directly to the cabinet main bonding point to prevent RF interference.\u003c\/li\u003e\n\u003cli\u003eLimit expansion modules to a maximum of 8 units on the Flexbus to ensure current draw remains within the 640 mA at 5 VDC limit.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52368619602216,"sku":"TC-FCCN01","price":315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0827\/6266\/2184\/files\/TC-PPD011_9b8317e9-ea31-4ebb-b2f5-72f0b056075a.png?v=1789114817","url":"https:\/\/www.powerdcs.com\/products\/honeywell-tc-fccn01-controlnet-gateway-adapter","provider":"Power DCS Parts Limited","version":"1.0","type":"link"}